Acceptance Test Plan & Report
1. Document Control
| Document Number | |
| Revision | |
| Date | |
| Prepared By | |
| Reviewed By | |
| Approved By |
2. Scope
| Product Family | |
| Part Number | |
| Prod Stage |
3. UUT Identification
4. Detailed ATR Results Matrix
| 4.1 USB Peripheral Interface Test | ||||
|---|---|---|---|---|
| Test Target | Expected Criteria | Actual Readout | Pass/Fail | Evidence Ref |
| USB Flash P.1 & P.2 | Speed > 100MB/s | |||
| USB Flash P.3 & P.4 | SuperSpeed > 350MB/s | |||
| 4.2 Serial Port Communication Test | ||||
|---|---|---|---|---|
| Port Definition | Configuration | Actual Readout | Pass/Fail | Evidence Ref |
| COM1 Interface | RS232 @ 115200 | |||
| COM2 Interface | RS422 @ 921600 | |||
| 4.3 Discrete Digital I/O (GPIO Matrix) | ||||
|---|---|---|---|---|
| GPIO Bank | Expected Logic | Actual Readout | Pass/Fail | Evidence Ref |
| GPIO_HI Array (1-12) | Logic State 1 | |||
| GPIO_L Array (1-24) | Logic State 0 | |||
| 4.4 Environmental Burn-In Screening | ||||
|---|---|---|---|---|
| Parameter | Setup | Execution Log | Pass/Fail | Evidence Ref |
| Cycle Duration | ||||
| Thermal Monitor | ||||
5. Final Disposition & Signatures
UUT Acceptance:
| Role | Name | Signature | Date |
|---|---|---|---|
| Test Engineer | |||
| QA Inspector |